Primitive Pumpkin Shutter

5-DSCN2316-001Primitive Pumpkin Shutter

I love turning things that end up on the curb into fun and whimsical seasonal decorations. Paint an old window shutter into a primitive pumpkin shutter for fall and Halloween decor. Not a painter? No problem. This is a primitive project, and crisp straight lines are not required. Except for the drying time of the paint, this shutter can be completed very quickly.

Things You Will Need:

Old window shutter
Tools for removing hardware
Orange acrylic paint
Paper plate
Sea sponge
Black acrylic paint
Stencil brush
Kitchen sponges
Permanent marker
Ruler
Scissors
Yellow-gold acrylic paint
Artist’s paintbrush
Green acrylic paint

1-DSCN2274-001Remove any hinges, knobs and hooks from your shutter and clean well.

Pour orange acrylic paint onto a paper plate. Wet a sea sponge and wring it out well. Dip the sponge in the paint and sponge it over the front, back and side surfaces of the shutter. Do not worry about complete coverage. This project allows for the original surface to peek through. Allow the paint to dry.

2-DSCN2286-001Many window shutters have a spine on the front that opens and closes the slats. For this project, this side will be the back. You want the flattest side to paint your pumpkin on. Lay the shutter with the flat side facing up. This is now the front. Pour black paint onto a paper plate. Dip the sea sponge in the paint and dab it on the front and sides of the shutter. The back will remain orange. Allow the paint to dry.

4-DSCN2301-001Using a large stencil brush, pounce orange paint in a long oval that covers most of the front surface on the shutter. This is your pumpkin shape. Allow the paint to dry.

3-DSCN2294-001Trace a 3-inch-tall triangle with a 2-inch base on a kitchen sponge using a permanent marking pen. Cut out the shape using scissors. Raggedy edges are fine. Draw a 1 1/2-inch-wide by 4 1/4-inch long rectangle on another kitchen sponge. Round the corners of the rectangle. Cut out the rectangle.

Dip the triangle into black acrylic paint. Stamp the triangle in the center of the pumpkin shape. This is the nose. Using the triangle and black paint, apply the eyes above the nose as desired. Dip the rectangle sponge into yellow-gold acrylic paint and stamp a mouth below the nose. Allow the paint to dry.

Dip an artist’s paintbrush into black acrylic paint. Paint a thin line around the mouth. This is supposed to look primitive, so perfect lines are not necessary. Paint a thin line across the center of the mouth. Paint vertical lines across the center line to create the teeth. Allow the paint to dry.

Using green acrylic paint, paint a stem at the top of the pumpkin.

5-DSCN2316-001My shutter was 6 1/2 inches wide by 20 inches long. This primitive project allows for altering and adjusting the steps to fit on any size shutter.

The finished shutter will lean against a wall or furniture, as it will not lay flat because of the spine on the back.

Enjoy!

Leave a Reply

  1. So cute, wish I could find some shutters any size. Hard to find here unless quite expensive . You think up the cutest darned projects to make, great use for an old shutter. Happy Fall