After each craft show I was either making more of things that had sold or making new things to fill in the holes from past sales. The shows were good, but keeping up with more projects was quite a whirlwind of activity. I didn’t take time to get pics of before or during steps of the new things, but I did make sure I snapped finished photos.
I should have thought these through a little bit better when I designed them. After they were finished and I was loading them, I realized they were about an inch and a half too tall to stand in the trailer. I had to lay them down to get them in. (sigh) I will definitely be tweaking this project next time I make them.
The snowmen were made using a white chenille bedspread. For something a little different with the wood construction, I chose to put the horizontal wood braces on the front.
I’ve made these “Giddy Up” signs before, but it’s been a few years. They were made using the inner panels from old doors.
This was a transformation from a yard sale find. A little paint, a little sanding and a little stenciling.
There were many more projects that were just remakes on things I had sold a lot of or sold out of. Most of those I had already posted on my blog in the past so I didn’t take new pics.
My front porch finally got a transformation into fall. I hauled a screen door home from my storage unit to add height to the display. I really like the way it looks. It’s kinda perfect that it’s black too.
Happy Fall Y’all!
Since the corks were too big for the tree I had in mind, cutting them in half was the perfect option. The cuts didn’t look smooth, but I was using a serrated knife. Yes, a chop saw probably would have created a cleaner cut, but I value my fingers and they would have been a bit too close to the blade for this cut.
And then I was “stuck”. Yep, you’ll get that pun in a moment.
I started out using craft glue to attach them together. Nope, didn’t work. I tried E-6000. Nope, didn’t work. I even tried hot glue. That also did not work. (sigh)
The problem was material the corks were made of. They were not cork. They were rubber. I am assuming wine companies have changed to rubber corks because of price, but I don’t know. What I do know is this particular rubber didn’t like any of the adhesives I could think of. Seriously, I had too many corks to throw in the towel. I was not going to let these corks win!
I finally came up with a different method of attaching. After drilling from one side to the other, on each cork, in each horizontal row, I connected them with wire. Curling the wire ends held the corks tightly together.
I wound miniature greenery garland around the tree, but something was still missing, not to mention I needed to come up with a way to hang them. I tried twine, but it didn’t look right so I tried hemp cord. Perfect! A bow was added to the front-center of the tree and the hanger was threaded through the curls on the top of the tree.
Another project heading to the craft show this weekend.
This was a great project to use up wood scraps and “play” with game letter tiles.
I have no idea what game the black tiles came from, but the others came from an old Scrabble game.
I first laid out all the Christmas words I could think of with the tiles I had.
Then I measured the length of the words and added a bit. Each lath was cut to the individual measurements of each word. Keeping track of that could have made me a little crazy, but I made a master list of all the words and measurements to save my sanity.
I drilled a hole for the hanger and gave each board a quick rub of stain.
And glitter! Yay! Yep, glitter just makes me happy. 🙂
Restyle a vintage train case into a shabby chic case for organizing your vanity or corralling your photos and journals. This romantic container could also be used to display small vintage collectibles.
*This is a project I had originally published on FaveCrafts.
Things You Will Need:
Train case (overnight bag)
Light-colored, flat latex paint
3 1/2-inch wide lace
Satin ribbon scrap
Remove the lining from the inside of your train case. The lining is glued in, so in most cases simply prying up an edge with a knife will allow you to grasp it and pull it out. If you encounter stubborn areas, cut it loose with a craft knife. Discard the lining.
Close the case. Use a wet rag on the outside of the case to remove dust and dirt.
Paint all sides of the case, including the hinges and latches, using a light-colored, flat latex paint. Allow the paint to dry and repeat with additional coats if necessary. Since old cases tend to soak up a lot of paint, I like to use wall paint left over from previous home improvement projects. It’s a great way to use up that little bit left in the can and it prevents the added cost of purchasing a large quantity of craft paint.
Undo the latches on the case and lightly paint over the areas that didn’t get painted when the latches were closed.
Lightly sand the surface and the edges of the case. Lightly sand over the metal of the latches and hinges. Wipe away the sanding dust using a dry rag.
Insert the blade of a craft knife in the gap between the lid and the case bottom. Allowing the gap to guide you, cut through the dry paint that is gluing the lid closed. After you have cut all the way around the case you will be able to pull open the lid.
Rip old book pages into 2 to 3-inch pieces. I used ripped book pages left over from other projects. They came from a variety of old books. Even though they didn’t match, the contrast of different book pages added interest to the project.
Working in one small area at a time, apply decoupage medium to the inside of the train case using a sponge brush. Place a book page piece over the medium. Smooth out the wrinkles and seal with a layer of medium over the paper. Repeat with additional book page pieces, overlapping their edges, until the inside of the case and lid has been completely covered. Allow the decoupage medium to dry.
Using a measuring tape, measure around the horizontal circumference of the case and add 24 inches. Using this measurement, cut a length of 3 1/2-inch wide lace. Wrap the lace around the case and tie the ends in a bow on the front.
Cut a 10-inch scrap of satin ribbon that coordinates with your paint color. Thread a key on the ribbon and tie the ribbon around the handle of the case. Using craft glue, attach a small flower to the key. Arrange and glue additional flowers to the lace bow.