Restyled Ice Skates

DSCF5849Restyled Ice Skates

DSCF5630I have quite a collection of ice skates that I have been saving for just the right project. This is one basket. I’m pretty sure I have another in my storage unit.

DSCF5637The skates in this basket were all black, but they were not going to stay that way. First things first, they all got a thorough cleaning and were laced up tight. Some had broken laces and some didn’t have any laces at all. I removed broken ones and then pulled out my stash of laces to replace any that were missing. It didn’t matter what color the laces were, they were not going to stay that way. Instead of a bow, I knotted the tops and cut off the excess. Finally I masked off the soles and used a cream wall paint to sponge paint the boot part of the skates. I sponged right over the laces.

DSCF5649After the paint was dry I covered everything with Mod Podge. By everything, I also mean the bottom of the boots and the blades. While the MP was still wet, I sprinkled them with crystal glitter.

DSCF5653When I was young, the roller skating rink was a favorite place to hang out. If you were really cool you had your own skates and didn’t need to rent them. Of course if you had your own skates you also had the big pom poms hanging from the laces. Those big pom poms inspired the huge bell on the front of my ice skates. I gave the bell a coat of MP and sprinkled with glitter before I wired it to the top of the skate laces.

DSCF5654I used strips of ripped fabric for the hanger and the tie around the ankle. To attach the hanger I drilled a hole through the top-back of the bootDSCF5645.The floral arrangement was achieved by first stuffing the shoe part of the skate with newspaper and then inserting green floral foam into the ankle section. A few floral picks and greenery were all it took to create a small winter arrangement.

DSCF5849Lastly, a little tag with “Let It Snow” printed on it was pinned to the tie around the ankle.

Enjoy!

I haven’t done it in quite a bit, but what better time to party than during the holidays! This is where I am partying this week. Come check out all the great ideas!

kitchen_funfridayToo Much Time On My Hands

New Fall Craft Show Projects-2015

DSCF5368We have participated in craft shows for three weekends in a row. Thankfully, this weekend we can take a break.

After each craft show I was either making more of things that had sold or making new things to fill in the holes from past sales. The shows were good, but keeping up with more projects was quite a whirlwind of activity. I didn’t take time to get pics of before or during steps of the new things, but I did make sure I snapped finished photos.

DSCF5345Fence Board Snowmen

I should have thought these through a little bit better when I designed them. After they were finished and I was loading them, I realized they were about an inch and a half too tall to stand in the trailer. I had to lay them down to get them in. (sigh) I will definitely be tweaking this project next time I make them.

DSCF5348Snowman Wall Hangings

The snowmen were made using a white chenille bedspread. For something a little different with the wood construction, I chose to put the horizontal wood braces on the front.

DSCF5353Giddy Up Signs

I’ve made these “Giddy Up” signs before, but it’s been a few years. They were made using the inner panels from old doors.

DSCF5357Stenciled Bench

This was a transformation from a yard sale find. A little paint, a little sanding and a little stenciling.

There were many more projects that were just remakes on things I had sold a lot of or sold out of. Most of those I had already posted on my blog in the past so I didn’t take new pics.

DSCF5362My front porch finally got a transformation into fall. I hauled a screen door home from my storage unit to add height to the display. I really like the way it looks. It’s kinda perfect that it’s black too.

Happy Fall Y’all!

Enjoy!

Cork Tree Ornaments

DSCF5217Cork Tree Ornaments

DSCF4858My sap bucket was beginning to overflow with my saved wine corks so I decided it was time to come up with a project. Hey, no judgement…it’s not like I drank it all in one night. 😉

Since the corks were too big for the tree I had in mind, cutting them in half was the perfect option. The cuts didn’t look smooth, but I was using a serrated knife. Yes, a chop saw probably would have created a cleaner cut, but I value my fingers and they would have been a bit too close to the blade for this cut.

And then I was “stuck”. Yep, you’ll get that pun in a moment.

I started out using craft glue to attach them together. Nope, didn’t work. I tried E-6000. Nope, didn’t work. I even tried hot glue. That also did not work. (sigh)

The problem was material the corks were made of. They were not cork. They were rubber. I am assuming wine companies have changed to rubber corks because of price, but I don’t know. What I do know is this particular rubber didn’t like any of the adhesives I could think of. Seriously, I had too many corks to throw in the towel. I was not going to let these corks win!

DSCF5088I finally came up with a different method of attaching. After drilling from one side to the other, on each cork, in each horizontal row, I connected them with wire. Curling the wire ends held the corks tightly together.

DSCF5097The trunk, top of the tree and the center cork in the center row were also drilled from top to bottom.

DSCF5099This allowed me to vertically connect each of the rows. Two ends of the wire extended out the top. They were also curled.

DSCF5102They didn’t look too cool yet, but after finally figuring out how to bring everything together I was strutting like a peacock.

DSCF5224I wound miniature greenery garland around the tree, but something was still missing, not to mention I needed to come up with a way to hang them. I tried twine, but it didn’t look right so I tried hemp cord. Perfect! A bow was added to the front-center of the tree and the hanger was threaded through the curls on the top of the tree.

Another project heading to the craft show this weekend.

Enjoy!

Wooden Door Peg Racks

DSCF5187Wooden Door Peg Racks

DSCF5189These peg racks turned out even better than I thought they would.

DSCF5190I’ve had a stash of old wooden doors for years, but with moving to a smaller house they had to be put in storage. I’ve been on a quest to reduce our storage space for over a year and have finally got two large units down to one unit half the size of the original two. That’s great, but most of the stuff that is left in the unit are things that I use for my projects. The only thing that makes sense in having them is to actually use them. It was time to repurpose the doors.

DSCF5175My husband and middle son cut the doors for the racks.

Since the doors are so old, the vibration from the saw caused a few of them to come apart so reconstruction was the first order of business.

DSCF5179After cleaning them up and sanding them I got out my stencils.

DSCF5177I really liked the natural aging on the doors so I decided not to add paint. Instead, I added a stained wax over everything. I am so glad I did. I think they look amazing.

DSCF5193The pegs were also stained and waxed before adding them to the doors.

Some nice heavy-duty hangers on the back completed the racks.

DSCF5183My first craft show of the season is this weekend in Arkansas City, Kansas at the Last-Run Car Show. If you are in the area, come check it out.

Enjoy!

Blue Jean Upholstered Chair

DSCF5109Blue Jean Upholstered Chair

Blue jeans and hot glue, what could make a girl happier? Okay, maybe I’m an unusual girl…but I think you’re gonna like this too.

DSCF5039-001Happy Labor Day! I’ve been laboring for a few weeks now as I am preparing for three back-to-back craft shows that start at the end of this month. I’ve been taking lots of pictures and I thought I should finally get something posted.

DSCF5036This chair started out a bit raggedy. I bought it at the Rose Hill citywide yard sale a few months ago. It’s actually a child’s chair…well, more like a pre-teen chair. The upholstery looked like a cat had used it as a scratching post. I considered doing a normal re-upholstery job on it, but as stated before,…I’m an unusual girl. I decided to use a new batch of old blue jeans and hot glue.

DSCF5115I don’t have any “in progress” pics. It just kinda happened that way. I got going…and kept going. That should tell ya something. This project works up very quickly.

On this chair I used 3 adult-size, men’s jeans. I picked them up at a local yard sale. Size matters. If you are looking for jeans to do a project like this, choose jeans that have a lot of fabric.

I cut them up into rough squares and basically hot glued them right onto the chair. How easy is that!!DSCF5110-001Hot glue it hot! 😉 When applying glue, I got as close to the edge of each piece as possible while still being able to pick it up and move fast. This did leave about 1/4 inch around the edges unglued. After the chair was completely covered I did go back and apply craft glue just under the sections of all the exposed edges.

I first covered the cushion with jeans, but I thought it made the chair look too busy. I dug through my fabric and found a good size piece of denim that worked perfectly to cover the cushion. I wrapped it like a present and hot glued.

The stars were made from the same fabric as the chair cushion. They were all glued using craft glue.

DSCF5116This will be headed to the craft shows.

DSCF5107Enjoy!