More Witchy Wisdom

More Witchy WisdomWitchy Wisdom

It’s that time of year again. Time to craft in preparation for fall craft shows.

These witchy signs have been a big hit the last couple of years so I headed out to the woodpile to find wood that had potential for making more. I’ve made these with pallet boards, wood chair seats and cupboard doors, but this time I used scraps from my brother’s new fence.

DSCF4876He had quite a few pieces that were already cut to the same size, so I didn’t have much cutting to get them prepared.

DSCF4877I try to buy gallons of paint colors that I use a lot of. I’ve used this same orange paint for about three years. Sigh…it’s almost gone so I’ll need to be buying more soon.

DSCF4902The stencil was made using my Cricut. It’s the same one I have used since the first sign I made. It’s just card stock, but it has held up well.

DSCF4944I tried something new this year. I had some black raffia in my stash so I used it for the witch brooms. In the past I have used the natural raffia. I really like them in black.

DSCF4953The last touch was attaching green raffia to the rusty wire handle.

Enjoy!

Scrap Wood Easter Signs

5-DSCF3428Easter Eggs and Bunny Trail Signs

We have been enjoying really nice weather so I took advantage of warmer days to work on some wood projects. Since the weather turned a bit cooler and drizzly I thought I should finally get this posted before the holiday comes and goes. 😉

I didn’t get pics of the steps like I should have…I kinda got carried away until the photo op was gone.

3-DSCF3419The St. Patrick’s Day shamrock signs did so well I decided to go ahead and make quite a few of the Easter signs. That may or may not have been a great idea. I’ve had them on local Facebook selling pages for about a week and even though they are selling, it has been slow going. Hmm…only time will tell. Oh well, if they don’t sell, then I guess I’ll be gifting friends, family and neighbors. :)

Like the shamrock signs, I used scrap pallet wood.

1-DSCF3411My Cricut came in handy once again for creating my stencils.

2-DSCF3420Unfortunately I didn’t have a bunny on any of my cartridges so I had to hunt through my pattern books to find the shape I was envisioning, then I cut that stencil by hand.

4-DSCF3424The eggs were requested by a previous customer. I thought they turned out pretty cute. I have already sold out of the pink eggs.

My favorite is the bunny trail sign.

Enjoy!

Scrap Wood Shamrock Signs

2-DSCF3176Scrap Wood Shamrock Signs

This project really took on a life of its own.

I sell lighter, smaller things on Etsy, mainly because bigger, heavier things are more expensive to ship. So what do I do with the furniture and wood things that I make when I am not doing craft shows?…I sell them on Facebook.

Facebook has several local selling pages for people that want to sell just about anything. I post a picture of the item, describe and price it. When someone is interested, they contact me and I send them info on where to pick it up.

1-DSCF2844A customer that bought one of my scrap wood hearts a few weeks ago asked if I would be making anything for St. Patrick’s Day. Honestly I hadn’t even considered it. With the cold weather and snow I was pretty sure it wasn’t going to happen, but then last weekend there was a few hours that were almost spring-like. I knew it wasn’t going to last so I gathered and cut wood to make signs.

1-DSCF3162Construction…

5-DSCF3189…and painting could be done indoors.

4-DSCF3181I made four and posted them on Facebook…and WOW! Within a couple of hours I had sold all four and had orders for nine more.

Who knew St. Patrick’s Day was such a popular holiday!?!?!

Making the extra orders was not as much fun. We didn’t get a lot of snow, but the wind managed to pile that small amount of snow around, on top of and in every crevice of my wood pile. I was about frozen by the time I pulled out the wood I needed for the signs. Then, of course, there was the time I spent freezing in the garage while I cut the boards.

4-DSCF3186Since the wood was in the snow, it was pretty wet. I went ahead and built the signs, but then I had to allow them to air dry overnight before I could paint them.

7-DSCF3197When they were dry, the assembly line really got moving. I made five more than I needed to fill orders because I knew we were in for more frigid weather and the idea of digging for more wood was/is definitely not appealing.

Enjoy!

Shabby Chic “LOVE” Sign

Shabby Chic "LOVE" SignShabby Chic “LOVE” Sign

Another window of opportunity. The temperature today was in the 50s and it was sunny. Tomorrow’s weather takes a header again, so I took advantage of today’s reprieve.

4-DSCF2874A new sign was just busting to come to life. I started by making a stencil with my Cricut. If you don’t have a Cricut or die cutting machine, printing enlarged letters from your computer will also work. Just choose a font and go for it. Use a craft knife to remove an “L”, “V”, and “E” from the paper. Btw, I use card stock for my stencils. It will last for several projects. I also cut a heart shape for the “O”.

1-DSCF2867I taped the letter stencils together and measured the size needed for the sign base. Back out to the wood pile I went for a couple of boards.

2-DSCF2869After cutting two boards to the length needed, I attached braces to the back to hold it all together.

3-DSCF2872I dry-brushed the front and side edges with a tan paint.

5-DSCF2875The letters were stenciled on with white paint.

6-DSCF2880I lightly traced the heart shape using a pencil. I know it’s kinda hard to see that in the pic, but trust me, it’s there.

Now, I will admit I made the coiled, fabric flowers a couple of days ago when it was cold. They are an easy, watching-tv, project.

7-DSCF2900I arranged the flowers inside the traced heart shape until I had complete coverage, then one by one I applied glue to the backs. I love hot glue, but just to be sure the flowers don’t come off later, I used a combination of craft glue and hot glue to attach.

Sawtooth hangers were added to the back, at the top of each brace.

Enjoy!